BCC Prodcucts

Paste Materials
Modeling Boards
Laminating Resins
Surface Coats
Casting Epoxy
Casting Urethanes
Prototyping Materials
Silicones
Urethane Elastomers
Adhesives
Accessories

Blehm Epoxy Surface Coats

The Blehm Plastics' surface coats are developed with the high-performance and the quality you have come to rely on from Blehm. For years our customers have come to expect quality prodcuts and Blehm is here to delivery quality and service to your door. Call today!

BP3042 BP 3042 and BP 3044 are white, medium set-time epoxy surface coats. BP 3042 resin is color indicated (green) and will turn white as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, insuring that they are thoroughly mixed yet wasting no time overmixing. BP 3044 does not contain this indicator system. BP 3042 and BP 3044 are formulated to have minimum skin irritation potential and avoid all carcinogenic materials in both the resin and hardener. Features: Mix ratio(by wt.): 100:15 Viscosity (mixed): Thixotropic (brushable) Pot life (min): 30 Cure time (hrs)(72°F): 16 Hardness (shore): 85D Color: White Datasheet	BP3046 BP 3046 is a medium set-time, white epoxy surface coat formulated especially to be machine dispensable. It is formulated to have minimum skin irritation potential and avoids all carcinogenic materials in both the resin and hardener. Features: Mix ratio(by wt.): 100:15 Viscosity (mixed): Thixotropic (machine dispensable) Pot life (min): 30 Cure time (hrs)(72°F): 16 Hardness (shore): 85D Color: White Datasheet

BP3176 BP 3176 is a high-temperature, aluminum-filled epoxy surface coat. It has a thixotropic consistency which allows successive coats to be brushed on to any desired thickness without sagging on vertical surfaces. BP 3176 is formulated to have minimum skin irritation potential and avoids all carcinogenic materials in both the resin and hardener. Features: Mix ratio(by wt.): 100:14 Viscosity (mixed): Thixotropic (brushable) Pot life (min): 55 Cure time (hrs)(72°F):See datasheet Heat Deflection(°F): 235 Hardness(shore): 85D Color: Gray Datasheet note: different cure schedule in the case of high temp tools	BP3180 BP 3180 is a high-temperature, aluminum-filled epoxy surface coat which has an excellent spraying consistency. BP 3180 is formulated to have minimum skin irritation potential and avoids all carcinogenic materials in both the resin and hardener. Features: Mix ratio(by wt.): 100:12 Viscosity (mixed): Sprayable Pot life (min): 70 Cure time (hrs)(72°F):See datasheet Heat Deflection(°F): 235 Hardness(shore): 85D Color: Gray Datasheet note: different cure schedule in the case of high temp tools

HOT PRODUCTS

BP9024

The 5-minute Epoxy Adhesive
BP 9024 is a fast-set epoxy adhesive specially formulated for the bonding of wood and urethane model board. It can also be used for making quick patches and fast laminates. The resin is color indicated (green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, insuring that they are thoroughly mixed, yet wasting no time overmixing.

Features:
Mix ratio(by wt.): 100:100
Viscosity (mixed): See datasheet
Pot life (min): 5
Set time (min)(72°F): 15
Hardness (shore): 60D
Color: Lt Amber
Datasheet

Blehm Plastics
2140 Earlywood Dr. • Franklin, IN 46131

Order line: 800-556-0067 • Fax: 317-736-4872

"mold making, silicone rubber, casting resin, moldmaking, rubber mold materials, casting plastic, liquid urethane, epoxy, wax, platinum based, tin-cured, modeling, toolmaking, foundry supplies, encapulating polyurethanes, potting compounds, silicon moulds, gel coat, filled fastcast, nesting assembly fixture, architectural restoration, taxidermy"