BP 2019 is a clear-amber epoxy adhesive formulated especially for the bonding of wood and urethane model board. It may be also used as a laminating resin. The resin is color indicated (green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, insuring that they are thoroughly mixed yet wasting no time overmixing.

Features:
Mix ratio(by wt.): 100:25
Viscosity (mixed): 2,100cps
Pot life (min): 30
*Cure time (hrs)(72°F): 16
Hardness (shore): 80D
Heat Deflection (°F):160
Color: Gray
Datasheet

The 5-minute Epoxy Adhesive
BP 9024 is a fast-set epoxy adhesive specially formulated for the bonding of wood and urethane model board. It can also be used for making quick patches and fast laminates. The resin is color indicated (green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, insuring that they are thoroughly mixed, yet wasting no time overmixing.

Features:
Mix ratio(by wt.): 100:100
Viscosity (mixed): See datasheet
Pot life (min): 5
Set time (min)(72°F): 15
Hardness (shore): 60D
Color: Lt Amber
Datasheet

Styrofoam Pattern Adhesive
BP 8002 is a water-based latex-rubber adhesives used for the rapid build-up of styrofoam foundry patterns. BP 8002 contains a green dye for easier visibility. BP8002 has been specially formulated and fully approved for the "Full Mold Foundry Process" of direct metal casting using styrofoam patterns.

Features:
Viscosity: Brushable thixotropic
Weight (per gal.): 7.6lbs
Base: Liquid Latex dispersed in water
Color: Green
Datasheet

Styrofoam Pattern Adhesive
BP 8003 is a water-based latex-rubber adhesives used for the rapid build-up of styrofoam foundry patterns. BP 8003 contains a natural cream color to blend with styrofoam. BP8003 has been specially formulated and fully approved for the "Full Mold Foundry Process" of direct metal casting using styrofoam patterns.

Features:
Viscosity: Brushable thixotropic
Weight (per gal.): 7.6lbs
Base: Latex rubber dispersed in water
Color: Cream
Datasheet

BP 6118 is a two component polysulfide adhesive formulated especially for the bonding of Blehm Cold Setting Rubber (CSR) to plaster casings. It may also be used for the bonding of CSR to other backing materials such as metal or wood.

Features:
Mix ratio(by wt.): 100:10
Viscosity (mixed): 6,500cps
Pot life (min): 5
Set time (min)(72°F): 30
Color: Black
Datasheet